- Thumbnail
-
- Resources
- livepapernsk.gumroad.com
- Author
- livepapernsk
- Printed File Format
- Page(s)
- 6
- Instruction Format
- Edge ID
Rocket Space Low Poly Papercraft
Scan models of the Rocket for the Assembly of paper or cardboard.
Height: 400 mm
Width: 138 mm
Depth: 138 mm
Attention! It's digital! Scan in electronic PDF formats
In order to assemble the model, you need to print this scan on thick paper or cardboard A4. We recommend using paper or cardboard with a density of at least 200 g/m2.
Included is 1 print file on A4.
To print this scan, you will need 6 A4 sheets.
For high-quality Assembly will need:
- scissors
- a sharp hobby knife
- glue, we recommend glue Moment Crystal
- metal ruler
- pen without ink, awl or thick needle
- a surface to cut, perfect neprorezaemye pad modeling
Scan models of the Rocket for the Assembly of paper or cardboard.
Height: 400 mm
Width: 138 mm
Depth: 138 mm
Attention! It's digital! Scan in electronic PDF formats
In order to assemble the model, you need to print this scan on thick paper or cardboard A4. We recommend using paper or cardboard with a density of at least 200 g/m2.
Included is 1 print file on A4.
To print this scan, you will need 6 A4 sheets.
For high-quality Assembly will need:
- scissors
- a sharp hobby knife
- glue, we recommend glue Moment Crystal
- metal ruler
- pen without ink, awl or thick needle
- a surface to cut, perfect neprorezaemye pad modeling
Sponsored: Google Advertising
